Related topics

Cannot run dcpromo because the Sysvol partition is not formatted a
Also can I usa the promise controller to boot only one drive or it's only for raid ? thanks "Tim" <T...@NoSpam.com> wrote in message news:cac6qr$rhv$1@lust.ihug.co.nz... The chip does report itself differently if the raid bios is on vs. off. When off its 82801EB and on its Intel (R) 82801ER SATA RAID Controller

Adding SATA drive to 8KNXP
... the SYSVOL Partition is not formatted as NTFS I'm using a mainboard asus with 865 chip set and system volume is on 2 disk maxtor 120GBsata controlled by intel ICH5R in raid 1 config. with new intel driver: 82801ER sata raid controller ver 4.1.0.6325 date 04/20/2004 How can I solve this problem Thanks Angelo .

IC7 G Noobie in tangle shock!
I have a single SATA HDD installed. The choices are: 1. Intel 82801FR SATA raid controller 2. Intel 82801FR SATA AHCI controller 3. Intel 82801ER SATA raid controller 4. Silicon image siI 3112 SATA raid controller Any help appreciated. Mike Hi Mike - As Conor states, if you have your CMOS set up right you probably

RAID на D865PERL
controller that is her C: drive containing XP Pro, and in Device Manager, there is no "Intel(R) 82801ER SATA RAID Controller" listed under "SCSI and RAID controllers" as is present on my Gigabyte GA-8KNXP mobo, and there is no IASTOR.SYS driver anywhere on the computer. On the Gigabyte GA-8KNXP, there is an option

Обновление драйверов для RAID-контроллеров от Intel и VIA - Al{..}
When I tried to install Intel Application Accelerator Raid Edition (IAAR), latest version 3.5.3 downloaded directly from Intel, the setup program said my chipset was not supported. It wanted an 82801ER while my device manager showed an 82801EB. Knowing it's the same beast without RAID BIOS enabled, I enabled SATA

What drivers you need for a single SATA Boot Drive (INTEL ICH5-R)
So look up the 82801ER controller at Intel.com, there's a good pdf manual "Intel Application Accelerator RAID Edition". Did anyone get a book with this mobo covering the Intel SATA Raid controller? I received 3 booklets, one for SATA Raid Function for the Sil3112, one for GigaRaid Function (IDE Raid),

RIS: How to use OEM mass-storage drivers?
Manuel Bouyer bou...@antioche.eu.org fa netbsd tech kern On Fri, Dec 05, 2003 at 11:36:03AM +0200, Simas Mockevicius wrote: Hi, there is a patch to make work 82801ER SATA/RAID controler. Because SATA raid is not yet suported it is to make kernel and system recognize this controler as piixide one.

P4P800-E Deluxe and ICH5R problems.
What settings did you use for both the Intel (Onchip) and Silicon Image (Onboard PCI) SATA RAID ROMs during this? Both disabled? Both enabled? I loaded both the Intel 82801ER and SiI3112 drivers from the Abit floppy. I was able to amazingly see both drives this time, Good, so we're heading in the right

Incompatible RAID controller?
... [SCSI] iaStor_ICH7DH = "Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7R/DH)" iaAHCI_ICH7R = "Intel(R) 82801GR/GH SATA AHCI Controller (Desktop SATA AHCI Controller (Desktop ICH6R)" iaAHCI_ICH6M = "Intel(R) 82801FBM SATA AHCI Controller (Mobile ICH6M)" iaStor_ICH5R = "Intel(R) 82801ER SATA RAID

Intel SATA RAID
PC Configuration: 3.0 GHz P4 CPU, Abit IC7-MAX3 motherboard, Intel 875P chipset, 1 GB Kingston PC3500 DDR434 RAM, ATI Radeon 9800 XT AGP video card, two WD 36 GB 10K RPM SATA RAID 0 system HDDs on Intel 82801ER controller, WD 250 GB 7.2K RPM IDE data HDD, WD 120 GB external USB HDD, Memorex Dual Format CD/DVD +/-

GA 8KNXP Rev 1 SATA RAID on Intel ICH5R
I tried to do a clean install and I could never get VISTA RC1 to recogonize any 82801ER driver I threw at it booting from the DVD disk. Manager Reports the following information under SCSI and RAID Controllers: Intel 82801ER SATA RAID Controller Driver: Intel Ver 3.5.0.2568 6/17/2003 Device Manager Reports the

SATA and XP
Intel Ich5r sata port 0 = boot drive. IDE Primary Master is a PATA drive. Bios is set to boot off SATA - the new F9 lists the drive details, Processor Revision: Model 2 Stepping 9 Active Processor Mask: 3 Number of Processors: 2 RAID Controller Information IDE Controller: Intel(R) 82801ER SATA RAID Controller,

Installing Vista Upgrade needing SATA RAID drivers
X f...@cut-this.w.pl alt pl comp os windowsxp Windows XP Home z SP2 nie rozpoznaje SATA RAID'u podczas instalacji (twierdzi, że żane dyski nie są podpięte). Intel(R) 82801FR SATA RAID Controller - Intel(R) 82801FR SATA AHCI Controller - Intel(R) 82801FBM SATA AHCI Controller - Intel(R) 82801ER SATA RAID Controller

ZTI OSD New Computer SATA bluescreen 0x0000007b
I/O Port 0x0000A000-0x0000AFFF Intel(R) 82875P Processor to PCI to CSA bridge - 257B I/O Port 0x0000A000-0x0000AFFF Intel(R) PRO/1000 CT Network 24DE IRQ 18 Intel(R) PRO/1000 CT Network Connection IRQ 18 Intel(R) 82801EB USB Universal Host Controller - 24D7 IRQ 18 Intel(R) 82801ER SATA RAID Controller IRQ 19

P4C800ED Single SATA and W2k
Here is the contents of my txtsetup.oem: from floppy: [disks] disk1 = "Intel Application Accelerator driver", iaStor.sys, \ My change vie kb article [Disks] disk1 ="Windows 2003 Driver Set v1.00", w23dsk1, \ [Defaults] scsi = iaStor [scsi] iaStor = "Intel(R) 82801ER SATA RAID Controller"

IC7 G Noobie in tangle shock!
... the SYSVOL Partition is not formatted as NTFS I'm using a mainboard asus with 865 chip set and system volume is on 2 disk maxtor 120GBsata controlled by intel ICH5R in raid 1 config. with new intel driver: 82801ER sata raid controller ver 4.1.0.6325 date 04/20/2004 How can I solve this problem Thanks Angelo.

ASUS P4C800E cannot install Intel App. accelerator
I still can't load the Intel Application Accelerator and this time I'm fairly certain that I did load the correct drivers at the F6 stage of the install. All the devices in device manager are reported to be OK. but there is no 82801ER SATA RAID Controller listed. Is it missing in my system and if yes,

HDD failure detection (RAID configuration)
Basically, if I read your post correctly you are trying to enable the Intel RAID BIOS and drivers etc without any drives fitted. This may be your problem as without a drive attached I do not think anything will load. However look in the Device Manager and if the Intel 82801ER SATA RAID controller is present but may

Starting SATA install, AV8
My system configuration is: 3.0 GHz P4 CPU, Abit IC7-MAX3 motherboard, Intel 875P chipset, 1 GB Kingston PC3500 DDR434 RAM, ATI Radeon 9800 XT AGP video card, two WD 36 GB 10K RPM SATA RAID 0 system HDDs on Intel 82801ER controller, WD 250 GB 7.2K RPM IDE data HDD, WD 120 GB external USB HDD, Memorex Dual Format

AbitEQ Misreads Fan Speeds & Temperatures on IC7-MAX3
In the bios, the "On-chip SATA" should've been set to Manual, not Auto. When this is done WinXP picks up the 82801 SATA RAID controller, installs it, and asks for drivers. The 82801EB was the IDE controller, According to Intel: Intel ® 82801EB I/O Controller Hub 5 (ICH5) / Intel ® 82801ER I/O Controller Hub 5 R